Ai gasit mai ieftin? Suna pentru cea mai buna oferta!
Oferta personalizata si reducere pentru 2 sau mai multe produse. Suna acum si afla!
Despite the name, the B-340 is not an upgraded B-300, but rather a version of the B-300XS with 4 channels and slightly reduced output power.
In use with a B-300 or B-300XS you have a total of 6 channels allowing for 5.1 or the new 6.1 / 7.1 system with active subwoofer. If you are looking for the ultimate in surround, simply use two B-340′s, givning you 8/7.1 channels and maximum flexibility.
The B-340 is a multi-purpose 4 channel power amplifier. It can be used in an almost endless range of combinations; in bi-amp mode the effect of using the B-340 is stunning, as always when you bi-amp. But here you can take bi-amping to another level by using the SAXO crossover, providing a truely active system (by removing the crossovers in your your speakers and using the SAXO instead).
No local or global feedback is one of the key issues of the B-340. This technology is further improved with Densen′s new patent pending DMCD circuit.
By using the DMCD circuit, the current is at all times present at the output terminal. The result of this is an extremely low output impedance and a a true non-feedback amplifier.
This is truely flexible high end, for peanuts…
Despite the name, the B-340 is not an upgraded B-300, but rather a version of the B-300XS with 4 channels and slightly reduced output power.
In use with a B-300 or B-300XS you have a total of 6 channels allowing for 5.1 or the new 6.1 / 7.1 system with active subwoofer. If you are looking for the ultimate in surround, simply use two B-340′s, givning you 8/7.1 channels and maximum flexibility.
The B-340 is a multi-purpose 4 channel power amplifier. It can be used in an almost endless range of combinations; in bi-amp mode the effect of using the B-340 is stunning, as always when you bi-amp. But here you can take bi-amping to another level by using the SAXO crossover, providing a truely active system (by removing the crossovers in your your speakers and using the SAXO instead).
No local or global feedback is one of the key issues of the B-340. This technology is further improved with Densen′s new patent pending DMCD circuit.
By using the DMCD circuit, the current is at all times present at the output terminal. The result of this is an extremely low output impedance and a a true non-feedback amplifier.
This is truely flexible high end, for peanuts…
Important: Conținutul acestei descrieri de produs a fost tradus automat și poate conține erori atât de vocabular, cât și de sintaxă și gramatică.
Specificatii | Power output in 8 ohms: 4 x 60W Power output in 4 ohms: 4 x 120W Power supply size: 750VA Storage capacity: 80.000uF THD + Noise @ rated output: Less than 0.1% Weight/shippingweight: 15/17 Kg Product dimensions (WxDxH): 440x310x64mm |
Tip Echipament | Putere Stereo |
- Pentru performante optime este necesara pozitionarea boxelor la o distanta de minim 30-40cm de peretele din spate pentru boxele cu bass-reflex in spate, pentru cele cu bass-reflex in fata, recomandam pozitionarea la o distanta de 10-20cm fata de peretele din spate.
- Boxele vor ajunge sa functioneze in parametrii recomandati de producator, dupa minim 50 de ore (ideal 100 ore) de functionare la volum mediu. In aceasta perioada de timp, de “rodaj a boxelor”, sunetul va fi la inceput ceva mai artificial, bass-ul nu va fi inca controlat, inaltele rigide iar vocile usor retinute, pe masura ce boxele vor functiona, veti remarca cum bas-ul devine mai controlat, mai prezent si mai voluminos, vocile si sunetele medii devin naturale si mai echilibrate, iar inaltele devin rafinate si detaliate. Exista boxe care necesita un „rodaj” mai amplu de minim 300 de ore mai ales in cazul celor care au difuzoare de kevlar, carbon sau alte materiale de acest tip. Boxele care se „rodeaza” cel mai repede sunt cele care au difuzoare de celuloza.
- Pentru performante optime este necesar „rodarea” echipamentului, In functie de complexitatea componentelor din aparatul dumneavoastra acesta poate dura intre 30-200 ore.
- Rodajul se face la volum minim, fiind astfel suficient faptul ca acesta este alimentat corect conform manualului de utilizare la 220-230 Volti si trece semnal audio sau video dupa caz prin el.
- Echipamentul supus „rodajului” va ajunge sa functioneze in parametrii recomandati de producator, dupa perioada mai sus mentionata. In aceasta perioada de timp, de “rodaj”, sunetul va fi la inceput ceva mai artificial, bass-ul nu va fi inca controlat, inaltele rigide iar vocile usor retinute, pe masura ce echipamentul va functiona, veti remarca cum bas-ul devine mai controlat, mai prezent si mai voluminos, vocile si sunetele medii devin naturale si mai echilibrate, iar inaltele devin rafinate si detaliate.
- Pentru performante optime este necesara „rodarea” cablurilor, In functie de complexitatea conductorului folosit, cat si geometriei acestuia, „rodajul” poate dura intre 30-100 ore.
- Rodajul se face la volum minim, fiind astfel suficient faptul ca va trece semnal audio sau video dupa caz prin el.
- Cablul supus „rodajului” va ajunge sa functioneze in parametrii recomandati de producator, dupa perioada mai sus mentionata. In aceasta perioada de timp, de “rodaj”, sunetul va fi la inceput ceva mai artificial, pe masura ce cablul va functiona, veti remarca cum bas-ul devine mai controlat, mai prezent si mai voluminos, vocile si sunetele medii devin naturale si mai echilibrate, iar inaltele devin rafinate si detaliate.
Pentru detalii privind aceste aspecte de rodaj si nu numai, va rugam sa ne consultati!
Acest site foloseste cookie-uri. Navigand in continuare, iti exprimi acordul pentru utilizarea acestora, in conformitate cu Politica De Protecţie a Datelor cu Caracter Personal.. Citeste mai mult despre cookie.
Setari date personale