Modul DSP Dayton Audio DSPB-KE
Stoc epuizat
Suna pentru cea mai buna oferta!
Oferta personalizata si reducere pentru 2 sau mai multe produse.
Suna acum si afla!
0721 429 099
Acest preț este valabil în limita stocului disponibil.
În această perioadă, prețurile pot avea modificări frecvente.
Aceasta promoție este valabila pana la data de 30 Aprilie 2026.
- sistem de rate online
- plată cu cadrul Edenred în magazin
- plăți cu Cardurile și Tichetele Sodexo
- plăți în rate prin Netopia
- Acest produs are garantie 2 ani de zile. Mentionam ca exista producatori cu garantie extinsa, pentru detalii va rugam sa ne contactati.
- Daca produsul este pe stoc in tara, livrarea se efectueaza in 1-2 zile lucratoare.
- Pentru disponibilitatea produsului, va rugam sa ne contactati.
- Livrare gratuita este pentru comenzi in valoare de peste 500 lei, exceptand produsele care se taxeaza cu greutate volumetrica (produse tratament acustic, izolatie fonica, adezivi, etc)
Termenul de retur este de 14 zile, conform O.U.G. 34/2014
The Dayton Audio DSPB-K DSP preamp adds powerful DSP processing to any amplifier or project! It’s preconfigured to adjust high/low pass filters and gain settings with the onboard potentiometers, but unlock its full potential by combining it with the Dayton Audio ICP1 (sold separately). Explore almost limitless possibilities of precise EQ, filters, bass processing, time alignment and so much more with the SigmaStudio development tool. All of this potential comes in a package smaller than most passive crossover circuits, even when combined with the DSPB-KE (sold separately), which adds all of the RCA and 3.5mm connections appropriate for making a 2.1 system.
Highlights
- Extremely popular Analog Devices’ ADAU1701 processor is built in for advanced DSP processing in a tiny package
- Four potentiometers built-in to adjust the gain and high/low pass filters for your satellite and subwoofer channels right out of the box
- Almost endless customization when combined with a Dayton Audio ICP1 (sold separately) and SigmaStudio
- 5-year Dayton Audio warranty
Product details
Dayton Audio DSPB-K DSP Kernel Board
Add the Dayton Audio DSPB-K between your input source and amplifier to add powerful DSP processing to your next speaker project! Thanks to the built-in Analog Devices ADAU1701 processor, this preamp is capable of filters, precise EQ, bass enhancement, time alignment and so much more that isn’t feasible with passive crossover components. Get quick access to filter and gain settings with the built-in potentiometers out of the box, but unlock the full potential of the DSPB-K by combining it with the Dayton Audio DSPB-ICP1 (sold separately), allowing it to be programmed with SigmaStudio and your Windows PC. Just make sure the switch on the DSPB-K is set to program mode, and the switch on the DSPB- ICP1 is set to USB. Check out the attached user manual and example SigmaStudio projects for more details about the capabilities of the entire DSPB series!
Integrated DSP Chip
Create nearly limitless possibilities of EQ, crossover, bass enhancement, time alignment and more thanks to the ADAU1701 DSP chip built into the DSPB-K kernel board.
Optional Programing Interface Board
Add the DSPB-ICP1 to unlock the full potential of the DSP built onto your DSPB-K! When connected to a Windows PC, the DSPB-ICP1 allows you to program your DSPB-K with the Analog Devices SigmaStudio development tool, allowing for practically endless DSP customization including precise EQ, filters, bass enhancement, time alignment, and more that is practically impossible with passive crossovers.
Optional DSPB-KE Connects it to an Amplifier
The DSPB-KE is a perfect match for the DSPB-K to quickly create a 2.1 system! The DSPB-KE includes standoffs and a 10-wire jumper cable to integrate these two boards into a diminutive package, adding to the DSPB-K the appropriate RCA and 3.5mm connections for a 2.1 system without the need for soldering or a custom solution.
Specifications: Dimensions: 1.97″ W x 1.97″ D x 0.5″ H (50 x 50 x 12.7 mm) • Four mounting holes: 0.11″ Dia. (2.8 mm), 1.77″ (45 mm) apart to center • Power input: 5 VDC • Power input jack: Micro USB.
| Disponibilitate | Acest produs nu mai face parte din oferta curenta AVmall |
|---|---|
| Unitate Pret | Bucata |
Produse asemănătoare
Recenzii clienți
Trebuie să fii autentificat pentru a publica o recenzie.
Recenzii
Elimină filtreleNu există recenzii până acum.