- Boxe de Podea
- Boxe de Raft
- Boxe de Centru
- Boxe Sateliti | Surround | LCR
- Boxe Bipolare | Surround Back
- Boxe Incorporabile
- Boxe On-Wall
- Boxe Dolby Atmos
- Boxe Active (Amplificate)
- Boxe Karaoke
- SoundBar
- Boxe Indoor | Outdoor Public Address
- Boxe de Exterior
- Subwoofer Activ
- Sisteme de Boxe 2.0 | 2.1
- Sisteme de Boxe 5.0 | 5.1
-10%
Preamplificator Phono Teac PE-505 Argintiu
7.999 lei 7.199 lei
Prețul este per Bucata
În Stoc Furnizor * Verificati disponibilitatea produsului!
Ai găsit mai ieftin?
Suna pentru cea mai buna oferta!
Oferta personalizata si reducere pentru 2 sau mai multe produse.
Suna acum si afla!
0721 429 099
Informații preț
Acest preț este valabil în limita stocului disponibil.
În această perioadă, prețurile pot avea modificări frecvente.
Soluții financiare
- sistem de rate online
- plată cu cadrul Edenred în magazin
- plăți cu Cardurile și Tichetele Sodexo
- plăți în rate prin Netopia
12 x rate
6 x rate
6 x rate
6 x rate
6 x rate
Garanție & Livrare
- Acest produs are garantie 2 ani de zile. Mentionam ca exista producatori cu garantie extinsa, pentru detalii va rugam sa ne contactati.
- Daca produsul este pe stoc in tara, livrarea se efectueaza in 1-2 zile lucratoare.
- Pentru disponibilitatea produsului, va rugam sa ne contactati.
- Livrare gratuita este pentru comenzi in valoare de peste 500 lei, exceptand produsele care se taxeaza cu greutate volumetrica (produse tratament acustic, izolatie fonica, adezivi, etc)
Retur
Termenul de retur este de 14 zile, conform O.U.G. 34/2014
Descriere
The PE-505 is a phono equalizing amplifier with dual monaural and fully-balanced input/output circuits that support balanced MC input.
The development of the PE-505 was achieved by relying on TEAC’s audio technology expertise, focusing on recording and playback, with the goal of accurately reproducing the original intent of the recording producers. The PE-505 will amplify even very faint audio signals picked up by the cartridge, process them without coloration, and then deliver them faithfully in order to keep the listener as close as possible to the original sound that was played before it was engraved on the master disc.
The high precision RIAA correction circuit, as well as both DECCA and COLUMBIA curves are supported. In addition, selectable load resistance for MC cartridges and load capacity for MM cartridges are present; allowing users to optimize the settings for the type of cartridge used and for the condition of the record.
Fully-balanced circuit design
From the head amplifier to the equalizing amplifier sections to the buffer amplifier section on the final output stage; the PE-505 employs a fully-balanced circuit design throughout all stages that amplifies, equalizes, and maintains signal purity of even the most extremely faint audio signals picked up by a cartridge.
Even unbalanced signal on the conventional RCA input is converted to the differential processing mode right after the input terminals.
Equalizing circuit on the differential cartridge outp
Absorbing errors on the balanced output, the differential output equalizing circuit delivers a more accurate audio signal. The differential output circuit that cross-multiplied the hot and cold outputs each other. As the result, both signals are equalized for a pure and natural audio signal delivery.
High-precision RIAA circuit
A newly developed NF-type equalizing amplifier achieves less than ±0.05dB of RIAA deviation.
(20Hz to 20kHz)
High Signal-to-Noise ratio
The PE-505 achieves 106dB on the RCA input*1, and 86dB on the XLR input*2, while the residual noise voltage reaches 10μV on the MM and 85μV on the MC*3 which are sophisticated.
*1 MM *2 MC *3 XLR input
High-precision OLD EQ curves
As well as the modern RIAA curve, individual curves on monaural records from DECCA and COLUMBIA issued before the RIAA curve was defined in 1955 are also supported.
Versatile settings and unique measuring functions
The PE-505 equips switchable load-capacity for MM cartridges and switchable load-resistance for MC cartridges. Furthermore, the load-resistance measuring function allows users to select an appropriate load-resistance by pressing the MEASURE key on the front panel to show the total load-resistance value including cable resistance on the gauge.
Also, the Subsonic function shows subsonic signals less than 6Hz on the gauge, while the subsonic filter (17Hz, -24dB/octave) cuts unnecessary low frequency out of the hearing range.
DEMAG function to refresh the cartridges
With the quick demagnetize function, both magnetized iron cores of MC cartridges and the step-up transformer are demagnetized by playing back a vinyl record for as short as 30 seconds with the DEMAG position.
Features at a glance
- Full differential inputs/outputs circuits
- High-precision RIAA EQ circuit achieves less than 0.05dB of deviation
- Individual EQ curves for monaural records and ones with EQ from DECCA and COLUMBIA
- Balanced MC input
- Switchable MC impedance (10, 22, 47, 100, 220, 470, 1kΩ)
- Switchable MM load-impedance capacity (0, 100, 220, 330pF)
- MC load-impedance measurement function
- Switchable MM/MC gain (High/Low)
- Subsonic detection
- Subsonic filter (17Hz, −24dB/oct.)
- MONO function that mixes left and right channels as a monaural channel
- DEMAG function that de-magnetizes cartridge
- 3-position pin-point feet
- GND terminal
- RoHS compliant
Specificații
Amplifier section
Total harmonic distortion (Rated output, 1kHz, GAIN Low)
RCA input (MM) 0.002%
RCA input (MC) 0.02%
XLR input (MC) 0.02%
Residual noise volt (Input short, GAIN low, IHF-A)
RCA input (MM) 10μV
RCA input (MC) 65μV
XLR input (MC) 85μV
S/N ratio (Input short, Rated input, GAIN Low, IHF-A)
RCA input (MM) 106dB
XLR input (MC) 86dB
RIAA deviation (20Hz to 20kHz) ±0.05dB
Channel separation −90dB or higher (MM, 10kHz, GAIN Low)
Gain
GAIN LOW
RCA input (MM) 34dB
RCA input (MC) 54dB
XLR input (MC) 54dB
GAIN HIGH
RCA input (MM) 46dB
RCA input (MC) 66dB
XLR input (MC) 66dB
Subsonic filter 17Hz, −24dB/octave
Phono input section
Unbalanced input RCA Pin (MC/MM compatible) × 1 pair
Max input level 150mV (MM, THD 0.1%, GAIN Low)
16mV (MC, THD 0.1%, GAIN Low)
Input impedance*
MM 47kΩ, Load-impedance: 0, 100, 220, 330pF
MC 10, 22, 47, 100, 220, 47
Informații suplimentare
| Disponibilitate |
În Stoc Furnizor * Verificati disponibilitatea produsului! |
|---|---|
| Unitate Pret |
Bucata |
Produse asemănătoare
Recenzii clienți
Trebuie să fii autentificat pentru a publica o recenzie.
Recenzii
Elimină filtreleNu există recenzii până acum.