Difuzor Dayton Audio CX120-8
- Descriere
- Specificații
- Informații suplimentare
- Recomandări
- Producător
- Recenzii (0)
Descriere
With a natural sounding 3/4 soft dome tweeter concentrically mounted in a long throw poly cone 4 woofer Dayton Audio's CX120-8 will produce extremely smooth response on and off-axis while avoiding the phase and lobing issues associated with standard 2-way designs. This driver is perfect for compact designs, portable speakers, or even custom car audio systems.
Highlights
- Full-range with accurate bass and extended high frequency response
- Coaxial mounted 3/4 silk dome tweeter
- Open cast frame for improved air flow and minimal power compression
- 4 curvilinear poly cone woofer with rubber half roll surround
Product Details
Dayton Audio CX120-8 4 Coaxial Driver with 3/4 Silk Dome Tweeter 8 Ohm
The Dayton Audio CX120-8 is a full-range coaxial loudspeaker providing high quality sound in a very compact format featuring a 4 curved linear poly cone woofer mated with a 3/4 silk dome tweeter. The poly cone woofer provides a good balance between stiffness, low mass and damping making for a very natural sounding driver with a smooth frequency response. The silk dome tweeter provides detailed and clear high frequencies with minimal distortion. In addition, the optimized tweeter placement and flaring reduces the phase issues with the woofer that is commonplace with even the BIG brand coaxes. Designed for use as a full-range in a small bookshelf speaker, an extended range (i.e. midrange/tweeter) driver in a 3-way system, or even car audio systems.
4 Woofer:
- 1 voice coil wound on an aluminum former for high power handling
- Curved linear shaped poly cone provides a good balance between stiffness, low mass and damping making for a natural sounding driver with a smooth frequency response
- Optimized rubber surround for reduced break up in the midrange band
- Attractive rigid open cast frame cast frame to minimize reflections, resonances and improve air flow
- High energy ceramic magnet for greater cone control and improved efficiency
Specifications: · Power handling: 40 watts RMS/80 watts max · VCdia: 1 · Le: 0.62 mH · Impedance: 8 ohms · Re: 6.2 ohms · Frequency response: 90-5,500 Hz · Fs: 87.5 Hz · SPL: 88.5 dB 2.83V/1m · Vas: 0.10 cu. ft. (2.99 liters) · Qms: 2.89 · Qes: 0.57 · Qts: 0.48 · Xmax: 3.0 mm · Dimensions: Overall diameter: 4-3/4, Cutout diameter: 3-7/8, Depth: 2.
3/4 Tweeter:
- Silk dome provides detail and clarity of high frequencies
- Coaxially mounted to pole piece of woofer cone
- Optimized placement and trimmed flaring to reduce phase issue interaction with woofer
- Strong neodymium magnet
- Trimmed flared throat to minimize phase issues causing suck-out with woofer
- High pass filter required (not included)
Woofer SeriesCoaxial
Woofer TypeCoaxial
Nominal Diameter4
Power Handling (RMS)40 watts
Power Handling (max)80 watts
Continuous Program Power
Impedance8 ohms
Sensitivity88.5 dB 2.83V/1m
Frequency Response90 to 20,000 Hz
Voice Coil Diameter1
Magnet Weight
DC Resistance (Re)6.22 ohms
Voice Coil Inductance (Le)0.63 mH
Resonant Frequency (Fs)87.5 Hz
Mechanical Q (Qms)2.89
Electromagnetic Q (Qes)0.57
Total Q (Qts)0.48
Diaphragm Mass Inc. Airload (Mms)4.82g
Moving Mass Of Diaphragm (Mmd)
Mechanical Compliance of Suspension (Cms)0.765 mm/N
Surface Area of Cone (Sd)52.51 cm²
Volume of Displacement (Vd)
BL Product (BL)5.08 Tm
Compliance Equivalent Volume (Vas)3.0 liters
Maximum Linear Excursion (Xmax)3.0 mm
Driver's Mechanical Losses (Rms)
Cone / Diaphragm MaterialPolypropylene
Surround MaterialRubber
Voice Coil Wire MaterialCCA
Voice Coil FormerAluminum
Dual Voice Coil
Basket / Frame MaterialCast Aluminum
Magnet MaterialFerrite
Shielded
Overall Outside Diameter4.75
Overall
Informații suplimentare
Producător | |
---|---|
Disponibilitate | La Comandă – Produsul se aduce la comandă in 3-6 zile! |
Tip Difuzor | Coaxial |
Unitate Pret | Bucata |
Diametru Difuzor | |
Impedanta Difuzor | 8 ohmi |
PENTRU BOXE:
- Pentru performante optime este necesara pozitionarea boxelor la o distanta de minim 30-40cm de peretele din spate pentru boxele cu bass-reflex in spate, pentru cele cu bass-reflex in fata, recomandam pozitionarea la o distanta de 10-20cm fata de peretele din spate.
- Boxele vor ajunge sa functioneze in parametrii recomandati de producator, dupa minim 50 de ore (ideal 100 ore) de functionare la volum mediu. In aceasta perioada de timp, de “rodaj a boxelor”, sunetul va fi la inceput ceva mai artificial, bass-ul nu va fi inca controlat, inaltele rigide iar vocile usor retinute, pe masura ce boxele vor functiona, veti remarca cum bas-ul devine mai controlat, mai prezent si mai voluminos, vocile si sunetele medii devin naturale si mai echilibrate, iar inaltele devin rafinate si detaliate. Exista boxe care necesita un „rodaj” mai amplu de minim 300 de ore mai ales in cazul celor care au difuzoare de kevlar, carbon sau alte materiale de acest tip. Boxele care se „rodeaza” cel mai repede sunt cele care au difuzoare de celuloza.
PENTRU AMPLIFICATOARE, DAC-URI, PREAMPLIFICATOARE, RECEIVER STEREO & HOME CINEMA, SURSE DIGITALE AUDIO-VIDEO:
- Pentru performante optime este necesar „rodarea” echipamentului, In functie de complexitatea componentelor din aparatul dumneavoastra acesta poate dura intre 30-200 ore.
- Rodajul se face la volum minim, fiind astfel suficient faptul ca acesta este alimentat corect conform manualului de utilizare la 220-230 Volti si trece semnal audio sau video dupa caz prin el.
- Echipamentul supus „rodajului” va ajunge sa functioneze in parametrii recomandati de producator, dupa perioada mai sus mentionata. In aceasta perioada de timp, de “rodaj”, sunetul va fi la inceput ceva mai artificial, bass-ul nu va fi inca controlat, inaltele rigide iar vocile usor retinute, pe masura ce echipamentul va functiona, veti remarca cum bas-ul devine mai controlat, mai prezent si mai voluminos, vocile si sunetele medii devin naturale si mai echilibrate, iar inaltele devin rafinate si detaliate.
PENTRU CABLURI:
- Pentru performante optime este necesara „rodarea” cablurilor, In functie de complexitatea conductorului folosit, cat si geometriei acestuia, „rodajul” poate dura intre 30-100 ore.
- Rodajul se face la volum minim, fiind astfel suficient faptul ca va trece semnal audio sau video dupa caz prin el.
- Cablul supus „rodajului” va ajunge sa functioneze in parametrii recomandati de producator, dupa perioada mai sus mentionata. In aceasta perioada de timp, de “rodaj”, sunetul va fi la inceput ceva mai artificial, pe masura ce cablul va functiona, veti remarca cum bas-ul devine mai controlat, mai prezent si mai voluminos, vocile si sunetele medii devin naturale si mai echilibrate, iar inaltele devin rafinate si detaliate.
Pentru detalii privind aceste aspecte de rodaj si nu numai, va rugam sa ne consultati!
Recenzii
Nu există recenzii până acum.