sistem de rate online
plată cu cadrul Edenred în magazin
plăți cu Cardurile și Tichetele Sodexo
plăți în rate prin Netopia- Descriere
- Specificații
- Informații suplimentare
- Recomandări
- Producător
- Recenzii (0)
Descriere
Hi-end Hi-Fi CD Player
Long-term Pursue for Quality Products
Black and White Classic Collocation
TY-1CD is flagship model made by durable materials with classic design for long term use.
TY-1CD
Hi-end CD Player main function
Multiple Audio Formats Decoding
Full Balance Output for Low Interference
2 way unbalance outputs and 1 way full balance output have good ability to
optimize sound delay for low distortion.
Lossless Outputs for Better Sound
ES9028 Decoding Chip
It adopts ES9028 decoding chip from American ESS company, handling up to 129dB SN, -120dB low distortion and up to 32bit/384K input signal to offer analytical sound.
OPA1632 Fully Differential
Operational Amplifier
OPA1632 op-amp from TI company has flexible fully differential architecture with differential input and differential output to drive high-performance audio analog-to-digital converters (ADCs). It delivers superior audio quality, very low noise, large output voltage swing and high current drive. It has the following advantages.
Lower Noise:
Differential output reduces even-order harmonics and minimizes common-mode noise interference. A very low input voltage noise of 1.3 nV/√Hz further ensures maximum signal-to-noise ratio and dynamic range.
Lower Distortion:
0.000022% THD for purer sound and better audio experience.
Wider Bandwidth:
An excellent gain bandwidth of 180 MHz and very fast slew rate of 72 V/μs which helps to produce exceptionally low distortion.
384 KHz High Sample Rate for Higher Quality Recording
Customized Capacitor
The filter capacitor and coupling capacitor
from Japanese ELNA company will give
strong support for sonorous bass,
warm mid-range and bright treble.
Customized Disk Drive
As one of the vital parts, this disk drive is selected and tested again and again to fit the CD player, which works well in reading and recognizing. With the anti-vibration base chassis, it can efficiently reduce shaking of the read/ write head and increase its reading accuracy.
Power Supply Group for Strong Driving
Dolby Atmos AV Receiver
It adopts analog linear power supply with 50W ring transformer and quality electrolytic
capacitor to form multi-way regulated power supply to separately supply power to digital circuit
and analog circuit. It also adopts separate layout to reduce interaction of unrelated power
supplies and offer pure power. This power supply group is the source of the whole machine,
giving strong support to the power storage and wide dynamic range.
Separate Multi-chamber Layout
for Lower Interference and More Purity
Structure:
The chamber of power supply, standby power supply & disk drive are separated form the chamber of D/A exchange, and the transformer is covered by a big shield.
Anti-interference:
All parts are adopted separating and shielding measure to make sure the interference and interaction are most-efficiently blocked so as to reduce noise and offer the purest sound.
Anti-vibration:
The shielding device makes it more stable and reliable, reducing the noise caused by vibration.
Beauty Inside and Out
TY-1CD player classic black & white and all aluminum with sleek linear and uncompromising design presenting its noble beauty. Just as our design concept: we render audio products noble.
It adopts silver and black aluminum cabinet design.
The middle dull polished silver aluminum with
wire-drawing black aluminum on both sides
generates its simple and elegant beauty.
With the endurable materials, sleek design
and reliable technology, it can be your
long-term audio player.
Parameters
Reference output voltage: 2V±1dB(1KHz)
Channel unbalance: ≤1dB(1KHz)
crosstalk: ≥105dB(1KHz)
THD: ≤0.002%(1KHz)
SNR: ≥110dB (A-weighted)
Frequency range: 20Hz-20KHz (+0/-1 dB)
Readable Disc Format: CD,HDCD,MP3,WMA
N.W: 10.7kg, G.W: 13kg
Power supply voltage: ~110/220V (50Hz/60Hz)
Overall size: 444x 114x 410mm (WxDxH)
Analog output port: 2 groups umbalance output, 1 group balance output
Digital output port: OPT, COAX, AES/EBU
Accessory: remote control, user manual
Informații suplimentare
| Producător | |
|---|---|
| Disponibilitate | La Comandă – Produsul se aduce la comandă in 3-6 zile! |
| Unitate Pret | Bucata |
PENTRU BOXE:
- Pentru performante optime este necesara pozitionarea boxelor la o distanta de minim 30-40cm de peretele din spate pentru boxele cu bass-reflex in spate, pentru cele cu bass-reflex in fata, recomandam pozitionarea la o distanta de 10-20cm fata de peretele din spate.
- Boxele vor ajunge sa functioneze in parametrii recomandati de producator, dupa minim 50 de ore (ideal 100 ore) de functionare la volum mediu. In aceasta perioada de timp, de “rodaj a boxelor”, sunetul va fi la inceput ceva mai artificial, bass-ul nu va fi inca controlat, inaltele rigide iar vocile usor retinute, pe masura ce boxele vor functiona, veti remarca cum bas-ul devine mai controlat, mai prezent si mai voluminos, vocile si sunetele medii devin naturale si mai echilibrate, iar inaltele devin rafinate si detaliate. Exista boxe care necesita un „rodaj” mai amplu de minim 300 de ore mai ales in cazul celor care au difuzoare de kevlar, carbon sau alte materiale de acest tip. Boxele care se „rodeaza” cel mai repede sunt cele care au difuzoare de celuloza.
PENTRU AMPLIFICATOARE, DAC-URI, PREAMPLIFICATOARE, RECEIVER STEREO & HOME CINEMA, SURSE DIGITALE AUDIO-VIDEO:
- Pentru performante optime este necesar „rodarea” echipamentului, In functie de complexitatea componentelor din aparatul dumneavoastra acesta poate dura intre 30-200 ore.
- Rodajul se face la volum minim, fiind astfel suficient faptul ca acesta este alimentat corect conform manualului de utilizare la 220-230 Volti si trece semnal audio sau video dupa caz prin el.
- Echipamentul supus „rodajului” va ajunge sa functioneze in parametrii recomandati de producator, dupa perioada mai sus mentionata. In aceasta perioada de timp, de “rodaj”, sunetul va fi la inceput ceva mai artificial, bass-ul nu va fi inca controlat, inaltele rigide iar vocile usor retinute, pe masura ce echipamentul va functiona, veti remarca cum bas-ul devine mai controlat, mai prezent si mai voluminos, vocile si sunetele medii devin naturale si mai echilibrate, iar inaltele devin rafinate si detaliate.
PENTRU CABLURI:
- Pentru performante optime este necesara „rodarea” cablurilor, In functie de complexitatea conductorului folosit, cat si geometriei acestuia, „rodajul” poate dura intre 30-100 ore.
- Rodajul se face la volum minim, fiind astfel suficient faptul ca va trece semnal audio sau video dupa caz prin el.
- Cablul supus „rodajului” va ajunge sa functioneze in parametrii recomandati de producator, dupa perioada mai sus mentionata. In aceasta perioada de timp, de “rodaj”, sunetul va fi la inceput ceva mai artificial, pe masura ce cablul va functiona, veti remarca cum bas-ul devine mai controlat, mai prezent si mai voluminos, vocile si sunetele medii devin naturale si mai echilibrate, iar inaltele devin rafinate si detaliate.
Pentru detalii privind aceste aspecte de rodaj si nu numai, va rugam sa ne consultati!
Fii primul care adaugi o recenzie la „CD Player ToneWinner TY-1CD”
Produse similare
CD Player NUPRiME CDT-8 Pro Negru
CD Player Vincent CD-S1.2 Negru
CD Player Vincent CD-S7 DAC Negru
CD Player Electrocompaniet EMC-1 MK V
34.650 lei / Bucata
CD Player Marantz SA-10
39.999 lei / Bucata
Recenzii
Nu există recenzii până acum.