Difuzor Dayton Audio DS135-8

Description

The Designer Series DS135-8 from Dayton Audio brings great audio fidelity and superior cosmetics to the 5 woofer category.

Highlights

· Cosmetic frame with low profile lip, designed for front mounting—no countersinking required!

· Coated paper cone, half roll rubber surround for durability and accurate reproduction

· Optimized to yield a low 3 dB down point and high potential output in a reasonably sized cabinet

· Smooth frequency response and linear roll-off simplify filter design, guaranteeing good results with off-the-shelf crossovers

· Vented pole piece for minimized power compression and maximized reliability

· Generous Xmax capability encourages use of moderate bass boost to tailor the response

· Retains the same family look as the popular Dayton Audio DVC Series subwoofers and passive radiators

Product Details

Dayton Audio DS135-8 5 Designer Series Woofer Speaker

The Designer Series by Dayton Audio was developed specifically with the speaker designer in mind. It is an affordable, attractive line of drivers that puts performance first. Careful engineering ensures that each speaker in the series is capable of handling full rated power at the lowest possible frequencies—without exceeding Xmax.

These speakers combine useful performance parameters with elegant style. Carefully optimized to provide superb audio reproduction when incorporated into a wide variety of enclosures and alignments, the Designer Series transducers put a beautiful face on audiophile excellence.

· Suggested enclosures:

Sealed cabinet: Type: Acoustic suspension (alpha 3.0), Qtc 0.60; Size (internal) including volume displaced by driver: 0.1 ft³; Internal cabinet dimensions (golden ratio): 9-1/8H x 5-5/8W x 3-1/2D. Typical results: 3 dB down-point (f3): 118 Hz; Low frequency limit at rated power without exceeding conventional Xmax (i.e. (voice coil length − gap height) / 2)): 50 Hz.

Vented cabinet: Type: Bass reflex; Size (internal) including volume displaced by driver and port: 0.17 ft³; Internal cabinet dimensions (golden ratio): 10-3/4H x 6-5/8W x 4-1/8D; Port dimensions (with flared exit): 1 dia. x 4L. Typical results: 3 dB down-point (f3): 66 Hz; Tuning frequency (fb): 62 Hz; Low frequency limit at rated power without exceeding conventional Xmax (i.e. (voice coil length − gap height) / 2)): 48 Hz.

Frequency response (FRD) and Impedance (ZMA) data files available to assist in crossover and enclosure modeling.

Woofer SeriesDesigner Series
Woofer TypeMidwoofer
Nominal Diameter3.50
Power Handling (RMS)50 watts
Power Handling (max)100 watts
Continuous Program Power
Impedance8 ohms
Sensitivity86.6 dB @ 2.83V/1m
Frequency Response50 – 7,000 Hz
Voice Coil Diameter25.4 mm
Magnet Weight21 oz.
DC Resistance (Re)5.9 ohms
Voice Coil Inductance (Le)0.84 mH @ 1 kHz
Resonant Frequency (Fs)52.5 Hz
Mechanical Q (Qms)2.02
Electromagnetic Q (Qes)0.48
Total Q (Qts)0.39
Diaphragm Mass Inc. Airload (Mms)9.7g
Moving Mass Of Diaphragm (Mmd)
Mechanical Compliance of Suspension (Cms)0.95 mm/N
Surface Area of Cone (Sd)75.4 cm²
Volume of Displacement (Vd)36.6 cm³
BL Product (BL)6.23 Tm
Compliance Equivalent Volume (Vas)7.27 liters
Maximum Linear Excursion (Xmax)4.85 mm
Driver's Mechanical Losses (Rms)
Cone / Diaphragm MaterialCoated Paper
Surround MaterialRubber
Voice Coil Wire MaterialCopper
Voice Coil FormerAluminum
Dual Voice Coil
Basket / Frame MaterialSteel
Magnet MaterialFerrite
Shielded

Additional information