Distribuitor de Alimentare Reductor DC Tomanek TAP8S+

1.625 lei / Bucata

La comandă / În stoc furnizor

Distribuitor de Alimentare Reductor DC Tomanek TAP8S+

1.625 lei / Bucata

Disponibilitate: La Comandă * Se aduce la comandă in 10-14 zile. SKU: TAP8S+ Categorii: , Brand:


    Suna pentru cea mai buna oferta!

    Oferta personalizata si reducere pentru 2 sau mai multe produse.

    Suna acum si afla!

    0721 429 099


    sistem de rate online

    plată cu cadrul Edenred în magazin

    plăți cu Cardurile și Tichetele Sodexo

    plăți în rate prin Netopia


    Spune-ți părerea



    Alertă preț

    Descriere

    TOMANEK AUDIO POWER model TAP8S+ 8-socket power strip designed for powering audiophile equipment.

    The TAP8S+ power strip is equipped with 8 Schuko sockets and an IEC input socket (7 sockets with Schaffner filters and 1 socket with a DC blocker).

    Interference protection for devices powered via the TAP8S+ is provided by seven independent Schaffner filters (one for each power socket). Thanks to the fact that each power socket has its own filter, devices connected to the strip are not only separated from the power source but also from each other (they do not interfere with each other when connected to the same strip). The same applies to the socket equipped with a DC blocker filter, which is a single DC blocker designed for only one socket.

    This combination provides very high interference suppression and allows for high current loads on the power strip (5 A per socket, but no more than 16 A in total for all sockets). The power strip can therefore be used to power devices with high power consumption, such as power amplifiers, as well as all other components of the audio system.

    One socket in the strip is equipped with a DC blocker, which is dedicated to amplifiers equipped with traditional transformers.

    A DC blocker is a device/filter whose task is to eliminate unwanted DC components from the 230 V power supply. The DC component is a ubiquitous phenomenon caused mainly by impulse devices (e.g. switching power supplies) and all kinds of converters. In domestic conditions, the source of this phenomenon can be, for example, automatic washing machines, internal power supplies of televisions, TV tuners, routers, switches, phone chargers, computer and laptop power supplies, etc.

    The DC component has a negative effect on transformers in audio devices – it causes their cores to become magnetised, which results in a significant increase in their operating volume (known as humming), greater heating of the transformer and distortion of the sinusoidal voltage waveform. All these negative effects of the presence of a constant component in the 230 V network translate into a deterioration of the parameters of power amplifiers and other audio devices. A secondary effect is also a significant increase in the power consumption of audio devices, which is largely lost in the form of excessive heating of the transformer and an increase in the operating noise of their mains transformers. The DC blocker eliminates all the negative effects of the presence of a DC component. Simply plug it between the 230 V socket and the device plug.

    The socket equipped with a DC Blocker has a load capacity of up to 1500 W (~6.52A).

    The strip is framed by a solid, powder-coated metal housing with compact dimensions of 70 x 90 x 460 mm. This design ensures that the strip is highly resistant to mechanical stress and electromagnetic interference. Schaffner filters are located on a common board inside the housing.

    The strip is supplied without a power cord. We encourage you to take advantage of our professional Tomanek TPC series cables.

    The strips are designed to be adapted to individual user requirements, so modifications such as the following are possible:

    • Installation of sockets without filters or in mixed mode, some with filters and some without
    • Installation of sockets of other standards, e.g. UK, USA or others
    • Installation of a switch
    • Installation of a power LED

    Technical specifications:

    • Number of output sockets: 8
      • Number of Schaffner filters for 7 sockets: 7 pcs, 1 Schaffner filter per socket
      • Number of DC filters (DC blocker) for 1 socket: 1 piece, 1 filter per socket
      • Type of output sockets: Schuko
    • Number of input sockets: 1
      • Type of input socket: IEC
    • Housing material: metal
    • Colour: black powder coated
    • Maximum load capacity of sockets with Schaffner filter: 1150 W (5 A)
    • Maximum load capacity of sockets with DC blocker: 1500 W per socket (approx. 6.52 A per socket)
    • Maximum load capacity of the entire strip: 3680 W (16 A)
    • Dimensions (mm): 70 x 90 x 460
    • Weight (kg): 2.3

    Technical specifications:

    • Number of output sockets: 8
      • Number of Schaffner filters for 7 sockets: 7 pcs, 1 Schaffner filter per socket
      • Number of DC filters (DC blocker) for 1 socket: 1 piece, 1 filter per socket
      • Type of output sockets: Schuko
    • Number of input sockets: 1
      • Type of input socket: IEC
    • Housing material: metal
    • Colour: black powder coated
    • Maximum load capacity of sockets with Schaffner filter: 1150 W (5 A)
    • Maximum load capacity of sockets with DC blocker: 1500 W per socket (approx. 6.52 A per socket)
    • Maximum load capacity of the entire strip: 3680 W (16 A)
    • Dimensions (mm): 70 x 90 x 460
    • Weight (kg): 2.3

    Informații suplimentare

    Producător

    Disponibilitate

    La Comandă * Se aduce la comandă in 10-14 zile.

    Unitate Pret

    Bucata

    Explicatii in ceea ce priveste rodajul echipamentelor, cat si al cablurilor, asezarea optima a echipamentelor in camera de auditie, importanta acusticii camerei si nu in ultimul rand sistemul de alimentare a intregului echipament:

    PENTRU BOXE:

    - Pentru performante optime este necesara pozitionarea boxelor la o distanta de minim 30-40cm de peretele din spate pentru boxele cu bass-reflex in spate, pentru cele cu bass-reflex in fata, recomandam pozitionarea la o distanta de 10-20cm fata de peretele din spate, dar totodata la o distanta de cel putin 50cm fata de peretii laterali. Tineti cont de faptul ca orice piesa de mobilier din incapere, joaca rol de absorbtie fonica, dar si de difuzie fonica daca acestea din urma sunt din materiale ceramica sau oglinzi, geamuri sau alt material reflectorizant. In acest sens, gasiti pe blogul nostru, multiple articole care va pot ajuta

    - Boxele vor ajunge sa functioneze in parametrii recomandati de producator, dupa minim 50 de ore (ideal 100 ore) de functionare la volum mediu. In aceasta perioada de timp, de “rodaj a boxelor”, sunetul va fi la inceput mai artificial, bass-ul nu va fi inca controlat, inaltele rigide iar vocile usor retinute, pe masura ce boxele vor functiona, veti remarca cum bas-ul devine mai controlat, mai prezent si mai voluminos, vocile si sunetele medii devin naturale si mai echilibrate, iar inaltele devin rafinate si detaliate. Exista boxe care necesita un „rodaj” mai amplu de minim 300 de ore mai ales in cazul celor care au difuzoare de kevlar, carbon sau alte materiale de acest tip. Boxele care se „rodeaza” cel mai repede sunt cele care au difuzoare de celuloza.

     

     

    Imbunatatirea sunetului unui sistem audio stereo (Partea I)

    Imbunatatirea sunetului unui sistem audio stereo – (Partea II)

     

    PENTRU AMPLIFICATOARE, DAC-URI, PREAMPLIFICATOARE, RECEIVER STEREO & HOME CINEMA, SURSE DIGITALE AUDIO-VIDEO:

    - Pentru performante optime este necesar „rodarea” echipamentului, In functie de complexitatea componentelor din aparatul dumneavoastra acesta poate dura intre 30-200 ore.

    - Rodajul se face la volum minim, fiind astfel suficient faptul ca acesta este alimentat corect conform manualului de utilizare la 220-230 Volti si trece semnal audio sau video dupa caz prin el.

    - Echipamentul supus „rodajului” va ajunge sa functioneze in parametrii recomandati de producator, dupa perioada mai sus mentionata. In aceasta perioada de timp, de “rodaj”, sunetul va fi la inceput ceva mai artificial, bass-ul nu va fi inca controlat, inaltele rigide iar vocile usor retinute, pe masura ce echipamentul va functiona, veti remarca cum bas-ul devine mai controlat, mai prezent si mai voluminos, vocile si sunetele medii devin naturale si mai echilibrate, iar inaltele devin rafinate si detaliate.

    - In ceea ce priveste echipamentul video precum videoproiector, TV, media player, blueray player, necesita un "rodaj" de cel putin 50 de ore. Lipsa acestuia nu va poate oferi maxim de performanta. "Rodajul" se efectueaza prin simpla utilizare a acestuia, intr-un mod conform specificatiilor mentionate de producator.

     

    PENTRU CABLURI:

    - Pentru performante optime este necesara „rodarea” cablurilor, In functie de complexitatea conductorului folosit, cat si geometriei acestuia, „rodajul” poate dura intre 30-100 ore.

    - Rodajul se face la volum minim, fiind astfel suficient faptul ca va trece semnal audio sau video dupa caz prin el.

    - Cablul supus „rodajului” va ajunge sa functioneze in parametrii recomandati de producator, dupa perioada mai sus mentionata. In aceasta perioada de timp, de “rodaj”, sunetul va fi la inceput ceva mai artificial, pe masura ce cablul va functiona, veti remarca cum bas-ul devine mai controlat, mai prezent si mai voluminos, vocile si sunetele medii devin naturale si mai echilibrate, iar inaltele devin rafinate si detaliate.

     

     

    Articole indrumatoare:

    Dictionar Audiofil

    Tratamentul Acustic si Izolarea Fonica

    Pentru un sistem echilibrat, trebuie tinut cont pe langa asezarea corecta a boxelor in incapere, al echipamentelor, sistemul de alimentare al acestora, tinand cont de instalatia electrica a locatiei.

    Pentru detalii privind aceste aspecte de rodaj si nu numai, va rugam sa ne consultati!

     

    Recenzii

    Nu există recenzii până acum.


    Fii primul care adaugi o recenzie la „Distribuitor de Alimentare Reductor DC Tomanek TAP8S+”

    Produse similare