- Descriere
- Specificații
- Informații suplimentare
- Recomandări
- Producător
- Recenzii (0)
Descriere
Innuos Statement
New Linear Power Architecture
Partnering once again with Dr. Sean Jacobs, a new power supply architecture was designed exclusively for the Statement. The power supply is distributed between two enclosures, with one enclosure containing the AC/DC conversion stage and the other containing the regulation stage together with the server components.
The advantage is clear: regulated “clean” power traverses a very short path, soldered point to point, with the least impedance and exposure to EMI. This is superior in efficiency compared to a traditional architecture where a separate power supply is used − regulated “clean” power needs to go through more obstacles of internal cabling, output connectors, cable, input connectors and more internal cable before it reaches its destination.
8 Independent Linear PSU Rails
Each critical component of the server receives its own dedicated power supply from one of the 8 independent power rails, further preventing component cross-contamination. Of particular note is the use of a dedicated power supply for each of the Ethernet and USB high-precision OCXO clocks, ensuring these clocks work at their best.
Custom-designed Motherboard
The motherboard has been fully EMI-optimised to our own exclusive design by, removing any unnecessary, noise-generating components capable of compromising audio. A fully-customised BIOS ensures the hardware works at its lowest noise without impairing performance. Further EMI treatment is then applied to the motherboard so that EMI is absorbed rather than reflected to other components.
Custom-designed Ethernet and USB Re-clocker
Not fully satisfied with existing USB and Ethernet re-clocking designs, Innuos designed in-house their own boards for this purpose.
At the heart of the design are 3 principles: The use of very high-precision OCXO clocks for timing the signals, extreme care in powering important components preventing cross-contamination, and extremely short paths between components.
While the use of OCXO clocks is not new, the way they are powered and the layout of the board has proven to be extremely important for their performance. As an example, dozens of USB controllers were analysed in terms of how they were powered and clocked so that they allowed this control to be done externally. The USB Controller is regulated by no less than 3 ultra-low noise regulators, one per independent voltage.
Keeping the clock very close to the controllers, via a dedicated track on the board itself, helps to avoid the losses in signal quality that come with the use of external clock units.
10mm CNC-machined Aluminium Chassis
Housed in a casing of 10mm-thick CNC-machined aluminium, the Statement is not just a pretty face. The thick metal enclosure helps to isolate external EMI, and its weight helps dampen harmful vibration into the system. By using a double-enclosure design, it also helps to contain the vibration effects of the massive 540VA toroidal transformer at its heart.
CONNECTIVITY:
Ethernet2 x rear panel RJ45 − Bridged Gigabit Ethernet
USB2x USB 2.0 (1x re-clocked, 1x non-reclocked), 1x USB 3.0 (Backup)
FORMATS:
CD FormatsRed Book
Disc CompatibilityCD, CD-R, CD-RW
Audio format for stored CDsFLAC (zero compression), WAV
Audio Formats Supported for streaming and playingWAV, AIFF, FLAC, ALAC, AAC, MP3, MQA (with supported DACs)
SAMPLE RATES:
Sample Rates44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4KHz. 192kHz, 352.8KHz, 384KHz, DSD64, DSD128, Native DSD up to DSD512 on selected DACs
Bit Depths16bit, 24bit, 32bit
USER CONTROL INTERFACES:
Web InterfaceWeb Browsers from iOS, Android (4.0 and up) or up-to-date Windows and OS X browsers
MobileApp for iPhone/iPad, Android and Windows 10
HARDWARE:
CD/DVD driveTEAC Slot-loading drive
Hard Drive1TB SSD with Vibration and EMI treatment
CPUIntel Quad Core N4200
Memory8GB DDR3 Low-Voltage RAM (4GB Dedicated for RAM Playback)
STREAMING AND CD STORAGE:
UPnP/DLNAIntegrated UPnP Server
Streaming ServicesQobuz, Tidal, Radio Paradise, Internet Radio
Roon CompatibilityRoon Core and Roon Endpoint
Average CD Storage Time5 minutes
CD MetadataFreeDB, MusicBrainz, Discogs, GD3
Compatible Music SystemsSonos Multi-room Wireless Music System
DLNA/UPnP compatible devices
USB DACs complying to USB Audio Class 2
USB DACs supporting DSD over DoP protocol
Selected USB DACs supporting Native DSD
REQUIREMENTS:
NetworkInternet connection to access album metadata when storing CDs, Internet Radio, Streaming Services and software updates
Network router with at least one available ethernet port
Premium subscription required for some streaming services such as Spotify, Qobuz and Tidal
Recommended App (USB Connection Only)iPeng 9 (iOS), OrangeSqueeze (Android), Squeeze Control (Windows 10)
DIMENSIONS (W x D x H):
Server = 420mm x 352mm x 88mm
Power = 420mm x 352mm x 102mm
WEIGHT:
Server = 8.2kg
Power = 13.4kg
IN THE BOX:
Innuos STATEMENT Music Server
Mains Cable
2x 0.3m umbilical interconnect
2m Ethernet Cable
Quick Start Guide
CONNECTIVITY:
Ethernet2 x rear panel RJ45 − Bridged Gigabit Ethernet
USB2x USB 2.0 (1x re-clocked, 1x non-reclocked), 1x USB 3.0 (Backup)
FORMATS:
CD FormatsRed Book
Disc CompatibilityCD, CD-R, CD-RW
Audio format for stored CDsFLAC (zero compression), WAV
Audio Formats Supported for streaming and playingWAV, AIFF, FLAC, ALAC, AAC, MP3, MQA (with supported DACs)
SAMPLE RATES:
Sample Rates44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4KHz. 192kHz, 352.8KHz, 384KHz, DSD64, DSD128, Native DSD up to DSD512 on selected DACs
Bit Depths16bit, 24bit, 32bit
USER CONTROL INTERFACES:
Web InterfaceWeb Browsers from iOS, Android (4.0 and up) or up-to-date Windows and OS X browsers
MobileApp for iPhone/iPad, Android and Windows 10
HARDWARE:
CD/DVD driveTEAC Slot-loading drive
Hard Drive1TB SSD with Vibration and EMI treatment
CPUIntel Quad Core N4200
Memory8GB DDR3 Low-Voltage RAM (4GB Dedicated for RAM Playback)
STREAMING AND CD STORAGE
Informații suplimentare
Producător | |
---|---|
Disponibilitate | În Stoc Furnizor * Verificati disponibilitatea produsului! |
Unitate Pret | Bucata |
PENTRU BOXE:
- Pentru performante optime este necesara pozitionarea boxelor la o distanta de minim 30-40cm de peretele din spate pentru boxele cu bass-reflex in spate, pentru cele cu bass-reflex in fata, recomandam pozitionarea la o distanta de 10-20cm fata de peretele din spate.
- Boxele vor ajunge sa functioneze in parametrii recomandati de producator, dupa minim 50 de ore (ideal 100 ore) de functionare la volum mediu. In aceasta perioada de timp, de “rodaj a boxelor”, sunetul va fi la inceput ceva mai artificial, bass-ul nu va fi inca controlat, inaltele rigide iar vocile usor retinute, pe masura ce boxele vor functiona, veti remarca cum bas-ul devine mai controlat, mai prezent si mai voluminos, vocile si sunetele medii devin naturale si mai echilibrate, iar inaltele devin rafinate si detaliate. Exista boxe care necesita un „rodaj” mai amplu de minim 300 de ore mai ales in cazul celor care au difuzoare de kevlar, carbon sau alte materiale de acest tip. Boxele care se „rodeaza” cel mai repede sunt cele care au difuzoare de celuloza.
PENTRU AMPLIFICATOARE, DAC-URI, PREAMPLIFICATOARE, RECEIVER STEREO & HOME CINEMA, SURSE DIGITALE AUDIO-VIDEO:
- Pentru performante optime este necesar „rodarea” echipamentului, In functie de complexitatea componentelor din aparatul dumneavoastra acesta poate dura intre 30-200 ore.
- Rodajul se face la volum minim, fiind astfel suficient faptul ca acesta este alimentat corect conform manualului de utilizare la 220-230 Volti si trece semnal audio sau video dupa caz prin el.
- Echipamentul supus „rodajului” va ajunge sa functioneze in parametrii recomandati de producator, dupa perioada mai sus mentionata. In aceasta perioada de timp, de “rodaj”, sunetul va fi la inceput ceva mai artificial, bass-ul nu va fi inca controlat, inaltele rigide iar vocile usor retinute, pe masura ce echipamentul va functiona, veti remarca cum bas-ul devine mai controlat, mai prezent si mai voluminos, vocile si sunetele medii devin naturale si mai echilibrate, iar inaltele devin rafinate si detaliate.
PENTRU CABLURI:
- Pentru performante optime este necesara „rodarea” cablurilor, In functie de complexitatea conductorului folosit, cat si geometriei acestuia, „rodajul” poate dura intre 30-100 ore.
- Rodajul se face la volum minim, fiind astfel suficient faptul ca va trece semnal audio sau video dupa caz prin el.
- Cablul supus „rodajului” va ajunge sa functioneze in parametrii recomandati de producator, dupa perioada mai sus mentionata. In aceasta perioada de timp, de “rodaj”, sunetul va fi la inceput ceva mai artificial, pe masura ce cablul va functiona, veti remarca cum bas-ul devine mai controlat, mai prezent si mai voluminos, vocile si sunetele medii devin naturale si mai echilibrate, iar inaltele devin rafinate si detaliate.
Pentru detalii privind aceste aspecte de rodaj si nu numai, va rugam sa ne consultati!
Recenzii
Nu există recenzii până acum.